Wiki source code of ESP8266 Docking Board

Last modified by Victor Zhang on 00:34, 22/07/2020

1	* Brief Description:
2	This is a docking board for NodeMCU 1.0 (ESP-12E), the purpose of the board is for rapid low fidelity prototyping. PIN OUT follows the RC servo standard of [S, V, G] so that most simple modules could be connected with ease. I2C/SPI port also reserved for use for more complex modules. The design does not have a small form factor and does not look optimized because it was designed for versatility. ~[[[More ...>>https://bitbucket.org/victorzzt/nodemcu-v3-docking-board/src/master/\|\|rel="noopener noreferrer" target="_blank"]]](((
3	\| \|
4	\| \|
5	\| \|
6
7
8	)))

Know more about me

1	* Brief Description:
2	This is a docking board for NodeMCU 1.0 (ESP-12E), the purpose of the board is for rapid low fidelity prototyping. PIN OUT follows the RC servo standard of [S, V, G] so that most simple modules could be connected with ease. I2C/SPI port also reserved for use for more complex modules. The design does not have a small form factor and does not look optimized because it was designed for versatility. ~[[[More ...>>https://bitbucket.org/victorzzt/nodemcu-v3-docking-board/src/master/\|\|rel="noopener noreferrer" target="_blank"]]](((
3	\| \|
4	\| \|
5	\| \|
6
7
8	)))