ESP8266 Docking Board

Last modified by Victor Zhang on 00:34, 22/07/2020
  • Brief Description:
    This is a docking board for NodeMCU 1.0 (ESP-12E), the purpose of the board is for rapid low fidelity prototyping. PIN OUT follows the RC servo standard of [S, V, G] so that most simple modules could be connected with ease. I2C/SPI port also reserved for use for more complex modules. The design does not have a small form factor and does not look optimized because it was designed for versatility. [More ...]
      
      
      

     

Created by Victor Zhang on 13:54, 09/01/2020

Navigation