Wiki source code of 3D printed toy train

Version 14.3 by Victor Zhang on 23:49, 18/12/2019

2.2	1	{{container layoutStyle="columns"}}
5.1	2	(((* Brief Description:
	3	** This is a 3d printed toy train that conforms to the standard of Tomica train
9.1	4	[[Tomica Track>>https://www.takaratomy.co.jp/english/products/tomica/0004.html\|\|target="_blank]] With a BLE interface through [[MH-ET Live ESP32 Kit>>http://mh.nodebb.com/topic/2/mh-et-live-esp32-devkit\|\|target="_blank]]
	5	[[image:V2,1Print_All_Parts.png\|\|height="501" width="640"]]
	6	** The top cover is not mandated
14.2	7	* Other resources
	8	** [[The L293DD H-Bridge board to fabricate and The sketch to run on MH-ET Live ESP32 Kit>>https://bitbucket.org/victorzzt/bleesp32train/src/master\|\|target="_blank]]
	9	* Other parts needed
	10	** Screws and nuts:
14.3	11	*** m2x6 8pcs
	12	*** m2x25 4pcs
	13	*** m2x10 1pc
	14	*** m2x30 2pcs
	15	*** m2 Nuts 15pcs
	16	** Shafts
	17	*** m2 x 30 1pc, m2 x 40 1pc
14.2	18	** GA12-N20 (Use 6V, the one in the picture is hard to find, needs to grind the shaft down to M2 x 8mm)
	19	[[image:Motor.jpg\|\|alt="Motor,Motor.jpg" height="407" width="400"]]
	20	** C15-2A
	21	[[image:Gear2.png\|\|alt="Gear2" height="205" width="200"]]
	22	** 08-2A x 1 inside the picture below
	23	[[image:Gear.jpg\|\|alt="Gear" height="300" width="400"]]
	24	* Known Issues:
	25	** )))
10.3	26	((({{video width="100%" height="960" attachment="Working.mp4"/}})))
2.2	27	{{/container}}
9.1	28
	29	abcde
14.2	30
	31
	32

Know more about me