Wiki source code of 3D printed toy train

Version 17.1 by Victor Zhang on 23:56, 18/12/2019

Show last authors
1 {{container layoutStyle="columns"}}
2 (((* Brief Description:
3 ** This is a 3d printed toy train that conforms to the standard of Tomica train
4 [[Tomica Track>>https://www.takaratomy.co.jp/english/products/tomica/0004.html||target="_blank]] With a BLE interface through [[MH-ET Live ESP32 Kit>>http://mh.nodebb.com/topic/2/mh-et-live-esp32-devkit||target="_blank]]
5 [[image:V2,1Print_All_Parts.png||height="501" width="640"]]
6 ** The top cover is not mandated
7 * Other resources
8 ** [[The L293DD H-Bridge board to fabricate and The sketch to run on MH-ET Live ESP32 Kit>>https://bitbucket.org/victorzzt/bleesp32train/src/master||target="_blank]]
9 * Other parts needed
10 ** Screws and nuts:
11 *** m2x6 8pcs
12 *** m2x25 4pcs
13 *** m2x10 1pc
14 *** m2x30 2pcs
15 *** m2 Nuts 15pcs
16 ** Shafts
17 *** m2 x 30 1pc, m2 x 40 1pc
18 ** Shaft clipper
19 [[image:ShaftNuts.jpg||alt="ShaftNuts" height="133" width="200"]]
20 ** GA12-N20 (Use 6V, the one in the picture is hard to find, needs to grind the shaft down to M2 x 8mm)
21 [[image:Motor.jpg||alt="Motor,Motor.jpg" height="407" width="400"]]
22 ** C15-2A
23 [[image:Gear2.png||alt="Gear2" height="205" width="200"]]
24 ** 08-2A x 1 inside the picture below
25 [[image:Gear.jpg||alt="Gear" height="300" width="400"]]
26 * Known Issues:
27 ** )))
28 ((({{video width="100%" height="960" attachment="Working.mp4"/}})))
29 {{/container}}
30
31 abcde
32
33
34

Recently Visited