Skip to Content

Wiki source code of 3D printed toy train

Version 10.4 by Victor Zhang on 20:04, 16/12/2019
Show last authors
1 {{container layoutStyle="columns"}}
2 (((* Brief Description:
3 ** This is a 3d printed toy train that conforms to the standard of Tomica train
4 [[Tomica Track>>https://www.takaratomy.co.jp/english/products/tomica/0004.html||target="_blank]] With a BLE interface through [[MH-ET Live ESP32 Kit>>http://mh.nodebb.com/topic/2/mh-et-live-esp32-devkit||target="_blank]]
5 [[image:V2,1Print_All_Parts.png||height="501" width="640"]]
6 ** The top cover is not mandated
7 ** Other resources
8 *** [[The L293DD H-Bridge board to fabricate and The sketch to run on MH-ET Live ESP32 Kit>>https://bitbucket.org/victorzzt/bleesp32train/src/master/||targer="_blank"]]
9 ** Known Problems:
10 *** )))
11 ((({{video width="100%" height="960" attachment="Working.mp4"/}})))
12 {{/container}}
13
14 abcde